Snot Wheel Co. Skateboard Rails Booger Bars 14.5" Teal
SKU: SNOT501
Description
Snot Wheel Co. Booger Bars Rails in Teal are rails from Snot, built to protect your graphic and speed up your slides. The teal color stands out under any deck.
Each Booger Bar is 14.5" long with a 5-hole design, and the pair comes with 10 wood screws.
Who Snot Booger Bars Are For
- Snot Wheel Co. fans
- Skaters who want a standout color
- Curb and coping sliders
- Anyone protecting their graphic
Features
- Teal color
- 14.5" length
- 5-hole design
- 10 wood screws included
Benefits
- Faster slides
- Protects your graphic
- Bright, standout look
How to Install Rails
- Set the rails on the bottom of your deck, between the trucks and parallel to the edges. Line up both sides so they match.
- Mark each screw hole with a pencil.
- Drill shallow pilot holes with a bit slightly smaller than the screws. Wrap tape around the bit as a depth stop, and never drill through the deck.
- Drive the screws in by hand so they don't strip or split the wood.
Specs
| Brand | Snot Wheel Co. |
| Model | Booger Bars Rails |
| Color | Teal |
| Length | 14.5" |
| Hole Pattern | 5-hole |
| Includes | 2 rails and 10 wood screws |
FAQ
Do these come as a pair?
Yes. You get 2 rails, one for each side of your deck, plus the mounting screws.
What do rails do?
Rails protect your board's graphic and help you slide faster on boardslides and lipslides.
Do I have to drill my board?
Yes, but only shallow pilot holes for the screws. Follow the install steps above, and never drill all the way through the deck.
Description
Snot Wheel Co. Booger Bars Rails in Teal are rails from Snot, built to protect your graphic and speed up your slides. The teal color stands out under any deck.
Each Booger Bar is 14.5" long with a 5-hole design, and the pair comes with 10 wood screws.
Who Snot Booger Bars Are For
- Snot Wheel Co. fans
- Skaters who want a standout color
- Curb and coping sliders
- Anyone protecting their graphic
Features
- Teal color
- 14.5" length
- 5-hole design
- 10 wood screws included
Benefits
- Faster slides
- Protects your graphic
- Bright, standout look
How to Install Rails
- Set the rails on the bottom of your deck, between the trucks and parallel to the edges. Line up both sides so they match.
- Mark each screw hole with a pencil.
- Drill shallow pilot holes with a bit slightly smaller than the screws. Wrap tape around the bit as a depth stop, and never drill through the deck.
- Drive the screws in by hand so they don't strip or split the wood.
Specs
| Brand | Snot Wheel Co. |
| Model | Booger Bars Rails |
| Color | Teal |
| Length | 14.5" |
| Hole Pattern | 5-hole |
| Includes | 2 rails and 10 wood screws |
FAQ
Do these come as a pair?
Yes. You get 2 rails, one for each side of your deck, plus the mounting screws.
What do rails do?
Rails protect your board's graphic and help you slide faster on boardslides and lipslides.
Do I have to drill my board?
Yes, but only shallow pilot holes for the screws. Follow the install steps above, and never drill all the way through the deck.