Lurpiv Skateboard Truck Mounting Hardware 1" Studs Pound In Style Bolts
by
Lurpiv
SKU: LRP502
Description
Lurpiv Studs 1" Pound-In Mounting Hardware is 1" pound-in mounting hardware from Lurpiv. No Phillips or Allen key required.
The set includes 8 stud bolts and 8 nuts.
Who This Hardware Is For
- Lurpiv fans
- Standard setups with no risers or 1/8" risers
- Skaters who want hardware that doesn't need a screwdriver
- Anyone replacing worn or stripped hardware
Features
- 1" length
- Pound-In drive
Benefits
- Mounts a full set of trucks
- Right length for no risers, or risers up to 1/8"
- No screwdriver needed
Which Length Do I Need?
Match your hardware to your riser height. Risers up to 1/8" work with 1" hardware, and you add length as risers get taller.
| Length | Use It With |
|---|---|
| 7/8" | No risers |
| 1" (this pack) | No risers, or risers up to 1/8" |
| 1 1/8" | 1/8" risers with a little extra room |
| 1 1/4" | 1/4" risers |
| 1 1/2" | 1/2" risers |
| 2" | Tall riser stacks and longboards |
For more, see our sizing guide for decks, trucks, wheels, hardware, and risers.
Specs
| Brand | Lurpiv |
| Model | Studs |
| Length | 1" |
| Drive | Pound-In |
| Bolts | 8 stud bolts |
| Nuts | 8 nuts |
Other Lurpiv Hardware in 1"
Same length, different style, color, or drive.
| Hardware | Length | Drive | Colors |
|---|---|---|---|
| Studs 1" Pound-In (this page) | 1" | Pound-In | Not listed |
| 1" Allen | 1" | Allen | Not listed |
Complete Your Setup
- TGM T-Tool Skate Tool: The T-Tool has the 3/8" socket for your mounting nuts, an Allen/Phillips driver, and the axle and kingpin sockets for the rest of your setup. It's our best-selling item.
FAQ
Is 1" the right length for me?
1" hardware is for no risers, or risers up to 1/8". See the length chart above.
How does pound-in hardware work?
Lurpiv recommends tapping them in slightly, then tightening the nut to bring them flush, rather than hammering them all the way.
How many bolts do I need?
A full set of trucks uses 8 bolts and 8 nuts, 4 per truck.
Description
Lurpiv Studs 1" Pound-In Mounting Hardware is 1" pound-in mounting hardware from Lurpiv. No Phillips or Allen key required.
The set includes 8 stud bolts and 8 nuts.
Who This Hardware Is For
- Lurpiv fans
- Standard setups with no risers or 1/8" risers
- Skaters who want hardware that doesn't need a screwdriver
- Anyone replacing worn or stripped hardware
Features
- 1" length
- Pound-In drive
Benefits
- Mounts a full set of trucks
- Right length for no risers, or risers up to 1/8"
- No screwdriver needed
Which Length Do I Need?
Match your hardware to your riser height. Risers up to 1/8" work with 1" hardware, and you add length as risers get taller.
| Length | Use It With |
|---|---|
| 7/8" | No risers |
| 1" (this pack) | No risers, or risers up to 1/8" |
| 1 1/8" | 1/8" risers with a little extra room |
| 1 1/4" | 1/4" risers |
| 1 1/2" | 1/2" risers |
| 2" | Tall riser stacks and longboards |
For more, see our sizing guide for decks, trucks, wheels, hardware, and risers.
Specs
| Brand | Lurpiv |
| Model | Studs |
| Length | 1" |
| Drive | Pound-In |
| Bolts | 8 stud bolts |
| Nuts | 8 nuts |
Other Lurpiv Hardware in 1"
Same length, different style, color, or drive.
| Hardware | Length | Drive | Colors |
|---|---|---|---|
| Studs 1" Pound-In (this page) | 1" | Pound-In | Not listed |
| 1" Allen | 1" | Allen | Not listed |
Complete Your Setup
- TGM T-Tool Skate Tool: The T-Tool has the 3/8" socket for your mounting nuts, an Allen/Phillips driver, and the axle and kingpin sockets for the rest of your setup. It's our best-selling item.
FAQ
Is 1" the right length for me?
1" hardware is for no risers, or risers up to 1/8". See the length chart above.
How does pound-in hardware work?
Lurpiv recommends tapping them in slightly, then tightening the nut to bring them flush, rather than hammering them all the way.
How many bolts do I need?
A full set of trucks uses 8 bolts and 8 nuts, 4 per truck.