When you order your wall hanger, it will be selected at random. Photos show examples but are not necessarily ones we have in stock. Some cuts feature striking graphic placements, while others stand out in different ways. Your hanger might include elements like wheel wells, original truck holes, or even original rails, making every piece truly one-of-a-kind.



Includes: One roughly 3"x3" cut (sizes will vary) of a Classic Powell Peralta 7-ply maple skateboard deck with hand-sanded rails and pre-drilled, countersunk holes.

Two 3" long #10-32 black Phillips head bolts with Two #10-32 black hex flange nuts & Two #10-32 black acorn nuts

One #8 x 1 1/2" black Phillips head screw and one Fischer Duopower 5x25 conical plastic wall anchor

Assembly is required. The countersunk bolt holes are carefully designed to fit snugly, preventing any sagging under the weight of the display deck. Due to the tight fit, you may notice minor splintering on the surface of the hanger when inserting the bolts. To minimize this, we recommend using a power drill to start the assembly process.

Once the bolt is anchored, finish tightening it by hand to reduce splintering and ensure the bolt is aligned properly. Misaligned bolts can make attaching your deck more difficult and increase the risk of scratching. We recommend using a 3/16" drill bit to install the wall screw.